Intel Lancewood Server

Intel Lancewood Server - dual Pentium 3, SCSII RAID 5. Motherboard Intel L440GXC Server Board osazen 1x Pentium 3 Katmai 600 MHz (Slot 1), 128MB RAM (možno až 2GB běžných SDRAM). RAID controller ICP vortex GDT6128RD - Intel i960RD® CPU (RAID 5 - hotswap). 1x 16GB SCSI disk IBM, 4x 8GB SCSI disk IBM. Integrated Intel PRO/100+ Ethernet. Intel Columbus III chasis. Stáří 3 roky při mírné zátěži.

Původní cena včetně RAID controlleru 160 tis. Kč, nyní k prodeji nejvyšší nabídce nad 30 tis. Kč.

V případě zájmu nás kontaktujte na lancewood@nuabi.com.

Technické detaily

Linux version 2.2.16 (root@columbus) (gcc version egcs-2.91.66 19990314/Linux (egcs-1.1.2 release))
Detected 596932 kHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 1189.48 BogoMIPS
Memory: 387376k/393152k available (856k kernel code, 416k reserved, 4112k data, 60k init)
Dentry hash table entries: 65536 (order 7, 512k)
Buffer cache hash table entries: 524288 (order 9, 2048k)
Page cache hash table entries: 131072 (order 7, 512k)
VFS: Diskquotas version dquot_6.4.0 initialized
Pentium-III serial number disabled.
CPU: Intel Pentium III (Katmai) stepping 03
Checking 386/387 coupling... OK, FPU using exception 16 error reporting.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.35a (19990819) Richard Gooch (rgooch@atnf.csiro.au)
PCI: PCI BIOS revision 2.10 entry at 0xfdab0
PCI: Using configuration type 1
PCI: Probing PCI hardware
Linux NET4.0 for Linux 2.2
Based upon Swansea University Computer Society NET3.039
NET4: Unix domain sockets 1.0 for Linux NET4.0.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
TCP: Hash tables configured (ehash 524288 bhash 65536)
Initializing RT netlink socket
Starting kswapd v 1.5
Serial driver version 4.27 with no serial options enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
ttyS02 at 0x03e8 (irq = 4) is a 16550A
pty: 256 Unix98 ptys configured
RAM disk driver initialized:  16 RAM disks of 4096K size
keyboard: Too many NACKs -- noisy kbd cable?
keyboard: Too many NACKs -- noisy kbd cable?
ide2: ports already in use, skipping probe
Floppy drive(s): fd0 is 1.44M
FDC 0 is a National Semiconductor PC87306
Configuring GDT-PCI HA at 0/13 IRQ 5
scsi0 : GDT6528RD
scsi : 1 host.
  Vendor: ICP       Model: Host Drive  #00   Rev:
  Type:   Direct-Access                      ANSI SCSI revision: 02
Detected scsi disk sda at scsi0, channel 0, id 0, lun 0
  Vendor: ESG-SHV   Model: SCA HSBP M7       Rev: 0.12
  Type:   Processor                          ANSI SCSI revision: 02
scsi : detected 1 SCSI disk total.
SCSI device sda: hdwr sector= 512 bytes. Sectors= 35824950 [17492 MB] [17.5 GB]
Partition check:
 sda: sda1 sda2 < sda5 sda6 >
RAMDISK: Compressed image found at block 0
EXT2-fs warning: checktime reached, running e2fsck is recommended
VFS: Mounted root (ext2 filesystem).
(scsi1)  found at PCI 0/12/0
(scsi1) Wide Channel A, SCSI ID=7, 32/255 SCBs
(scsi1) Downloading sequencer code... 396 instructions downloaded
enable_irq() unbalanced from d8012b1a
(scsi2)  found at PCI 0/12/1
(scsi2) Wide Channel B, SCSI ID=7, 32/255 SCBs
(scsi2) Downloading sequencer code... 396 instructions downloaded
scsi1 : Adaptec AHA274x/284x/294x (EISA/VLB/PCI-Fast SCSI) 5.1.28/3.2.4
       
scsi2 : Adaptec AHA274x/284x/294x (EISA/VLB/PCI-Fast SCSI) 5.1.28/3.2.4
       
scsi : 3 hosts.
(scsi1:0:6:0) Synchronous at 80.0 Mbyte/sec, offset 31.
  Vendor: IBM       Model: DNES-318350W      Rev: SA30
  Type:   Direct-Access                      ANSI SCSI revision: 03
Detected scsi disk sdb at scsi1, channel 0, id 6, lun 0
SCSI device sdb: hdwr sector= 512 bytes. Sectors= 35843670 [17501 MB] [17.5 GB]
 sdb: sdb1
VFS: Mounted root (ext2 filesystem) readonly.
change_root: old root has d_count=1
Trying to unmount old root ... okay
Freeing unused kernel memory: 60k freed
Adding Swap: 522072k swap-space (priority -1)